11330

Ka-band LNB 26.2-27.2 GHz WR-28 N/F/SMA

Short description

Ka-band LNB 26.2–27.2 GHz WR-28 N/F/SMA is a high-stability low-noise block downconverter designed for high-frequency signal reception in satellite, test, or telecommunication systems. It receives signals from the 26.2–27.2 GHz Ka-band range and downconverts them to 1.0–2.0 GHz IF, using a 25.2 GHz local oscillator (LO). The unit features a WR-28 input and selectable SMA, N-type, or F-type output.

- +
  • Description
  • Downloads

This Ka-band LNB is purpose-built for advanced satellite communication, remote sensing, radar, and telemetry systems. It ensures high signal integrity through its low noise figure (≤3.0 dB) and stable LO frequency (±1 ppm). Its 50 dB gain and extended operating range from –30 °C to +60 °C make it ideal for professional, field, or lab-based deployments. The WR-28 waveguide input ensures optimal Ka-band reception, while multiple connector options enable flexible integration.

L.O.: 25.2 GHz IN freq.: 26.2-27.2 GHz OUT freq.: 1000-2000 MHz

Key Features:

  • Wideband input range: 26.2 – 27.2 GHz

  • Low-noise design: ≤3.0 dB noise figure

  • High gain: ≥50 dB with ripple ≤±2 dB

  • Highly stable LO: 25.2 GHz with ±1.0 ppm

  • Versatile output connectors: SMA / N-type (50 Ohm) or F-type (75 Ohm)

  • Robust construction: Weather-resistant, aluminum housing

  • Wide power range: Operates on +12 to +24 VDC

  • Low power consumption: ≤350 mA

  • Extended environmental tolerance: –30 °C to +60 °C, 95% humidity

Main Functions:

  • Downconverts Ka-band RF signals (26.2–27.2 GHz) to L-band IF (1.0–2.0 GHz)

  • Amplifies weak satellite or telemetry signals with minimal distortion

  • Interfaces high-frequency RF front ends to L-band receivers or analyzers

  • Filters and rejects image frequencies with ≥40 dB suppression

  • Converts waveguide signals for use with 50 Ohm or 75 Ohm systems

👉 Order the Ka-band LNB 26.2-27.2 GHz WR-28 N/F/SMA now and ensure your system’s reliability!

Parameter Value
Input frequency range 26.2 – 27.2 GHz
Output frequency range 1.0 – 2.0 GHz
Local oscillator frequency 25.2 GHz
Input VSWR (max) 2.0
LO frequency stability (ppm) ±1.0
Output impedance 50 Ohm (SMA/N-type), 75 Ohm (F-type)
Gain (min) 50 dB
Gain flatness across full band ±2.0 dB
Gain ripple within 30 MHz ±0.75 dB
Noise figure (max) 3.0 dB
Image rejection (min) 40 dB
Output P1dB (min) +3 dBm
Supply voltage +12 to +24 V
Current consumption (max) 350 mA
Operating temperature –30 °C to +60 °C
Storage temperature –40 °C to +80 °C
Relative humidity 0 – 95%

Taking into consideration that we (ROKS PrJSC) are developer and system integrator, also do not stop on our technical growth and improvement, know that the view of all our devices and equipment including their technical parameters may be different from pictures presented on website and parameters listed on each device webpage.

Note! All details the customer has to confirm in advance during ordering and before payment. Those parameters that were not specified and / or were not agreed while ordering will be implemented as basic at the discretion of the manufacturer. Each of our customers has a 1.5 year warranty and 7 year aftersales support for the whole range of our products.

Documentation