Frequency Selective Low Noise Amplifier is a frequency selective RF low noise amplifier designed for 1160-1610 MHz operation. This 1160-1610 MHz LNA amplifies desired signals while attenuating unwanted ones, improving signal quality and system performance in receiver front-end applications.
This 20 dB gain frequency selective LNA features noise figure ≤ 1.5 dB, output power P1dB ≥ 10 dBm, output IP3 ≥ 25 dBm, max input power ≥ +10 dBm, and 50 Ohm nominal impedance. With N- or SMA-type connector options, 6 V input voltage, power consumption ≤ 0.5 W, and compact 115x68x24 mm dimensions, it is a tiny and reliable solution for stable RF amplification.
Technical Specifications of Frequency Selective Low Noise Amplifier 1160-1610 MHz
Frequency Selective Low Noise Amplifier is a type of LNA that incorporates frequency filtering to amplify desired signals while attenuating unwanted ones, improving signal quality and system performance. This frequency selective RF low noise amplifier is designed for 1160-1610 MHz operation and works as a stable filtered receiver amplifier for RF front-end applications.
This 1160-1610 MHz frequency selective LNA features gain ≥ 20 dB, noise figure ≤ 1.5 dB, gain flatnes ≤ 2.5 dB, output power P1dB ≥ 10 dBm, output IP3 ≥ 25 dBm, max input power ≥ +10 dBm, and 50 Ohm nominal impedance. The device operates from 6 V, consumes ≤ 0.5 W, and uses N- or SMA-type connector options in a compact 115x68x24 mm housing.
Key Features of Frequency Selective Low Noise Amplifier 20 dB
Frequency-selective amplification
- Amplifies desired signals while attenuating unwanted ones
- Improves signal quality and system performance
- Suitable for receiver front-end use
Low-noise RF performance
- Gain ≥ 20 dB
- Noise figure ≤ 1.5 dB
- Output power P1dB ≥ 10 dBm
- Output IP3 ≥ 25 dBm
Compact reliable design
- 50 Ohm nominal impedance
- N- or SMA-type connector options
- Compact 115x68x24 mm size
- Tiny and reliable design
Applications
Receiver front-end applications
- Receiver front-end LNA
- Receiver front-end low noise amplifier
- Filtered receiver preamplifier
Signal quality improvement
- Improves signal quality and system performance
- Enhances receiver sensitivity
- Supports stable RF amplification
RF integration
- RF low noise preamplifier applications
- Frequency selective receiver amplifier
- Receiver performance enhancement amplifier tasks
Compatibility of Frequency Selective Low Noise Amplifier
Frequency compatibility
- Designed for 1160-1610 MHz operation
- Suitable for systems working in the specified band
Interface compatibility
- 50 Ohm nominal impedance
- In/Out type of connector: N- or SMA-type
Power compatibility
- Input voltage: 6 V
- Power consumption: ≤ 0.5 W
How It Works❓
A frequency selective LNA uses frequency filtering together with low-noise amplification to strengthen desired signals and reduce the influence of unwanted ones. In this model, the amplified signal is increased relative to the noise floor, which improves receiver sensitivity and overall RF system performance in the 1160-1610 MHz range.
Why Choose the Frequency Selective Low Noise Amplifier 1160-1610 MHz, 20 dB, 2×N-Type, 50 Ohm❓
👉Choose this amplifier when you need a 1160-1610 MHz frequency selective LNA with gain ≥ 20 dB, noise figure ≤ 1.5 dB, output power P1dB ≥ 10 dBm, output IP3 ≥ 25 dBm, and 50 Ohm impedance for stable receiver front-end performance. With 6 V input, low power consumption, compact dimensions, and N- or SMA-type connector options, it is a practical solution for reliable RF amplification in the specified frequency range.
👉Order on our website today and get your personal discount.
If you have any questions, contact our manager — we are always ready to find the exact parameters for your telecommunication needs.📞
