Low Noise Block PLL LO 3.35 GHz is a Low Noise Block Downconverter designed for RF signal gain and downconversion from S-band to L-band intermediate frequencies. This PLL LNB amplifies weak 2.0-2.4 GHz signals and converts them to the 950-1350 MHz range with a highly stable local oscillator and effective ALC system.
This 2.0-2.4 GHz to 950-1350 MHz LNB features 51 dB gain, noise figure ≤ 2.5 dB, image rejection ≥ 40 dB, and LO stability of ± 1 ppm. A built in front-end Band Pass Filter removes unwanted signals and noise, while a low-pass filter suppresses image channel and local oscillator signals. The compact protected case supports reliable +12…+24 VDC operation.
Technical Specifications of Low Noise Block PLL LO 3.35 GHz
Low Noise Block PLL LO 3.35 GHz is a Low Noise Block Downconverter designed for RF signals gaining and transforming from S-band to L-band intermediate frequencies. This PLL LNB amplifies weak signals in the 2.0-2.4 GHz range and converts them to the 950-1350 MHz range, combining low noise figure, a highly stable local oscillator, effective ALC, and extended dynamic range.
This 2.0-2.4 GHz to 950-1350 MHz LNB features minimum 51 dB gain, noise figure not more than 2.5 dB, image rejection minimum 40 dB, LO stability of ± 1 ppm, and phase noise of -65 dBn/Hz at 1 kHz and -80 dBn/Hz at 10 kHz. It operates from +12…+24 VDC with maximum power consumption of 3.0 W and is built in a compact 115x68x24 mm case.
Key Features of Low Noise Block PLL LO 2-2.4 GHz Input, 51 dB, 950-1350 MHz Output
- 51 dB gain for RF signal amplification and downconversion
- PLL local oscillator with 3.35 GHz LO frequency
- LO frequency stability of ± 1 ppm
- Built in front-end Band Pass Filter for unwanted signal and noise suppression
- Low-pass filter for image channel and local oscillator signal suppression
- Effective ALC system with minimum 25 dB range
- Compact protected housing for tiny and reliable operation
Applications
- RF signal gaining and transforming from S-band to L-band
- Converting 2.0-2.4 GHz signals to the 950-1350 MHz intermediate frequency range
- Intermediate frequency signal conversion using a mixer and local oscillator
- Professional RF downconversion tasks requiring low noise figure and stable LO performance
Compatibility of Low Noise Block PLL LO 51 dB
- Input frequency compatibility: 2.0-2.4 GHz
- Output frequency compatibility: 950-1350 MHz
- Power compatibility: +12…+24 VDC
- Suitable for systems requiring stable S-band to L-band IF conversion
- Suitable for compact installations where protected housing and low power consumption are important
How It Works❓
A Low Noise Block Downconverter first uses a built in front-end Band Pass Filter to remove unwanted signals and noise before the Low Noise Amplifier stage. The LNA strengthens the desired signal relative to the noise floor, and the frequency converter then shifts the input spectrum to an intermediate frequency using a mixer and a 3.35 GHz local oscillator. A low-pass filter suppresses image channel and local oscillator signals, helping maintain clean 950-1350 MHz IF output.
Why Choose the Low Noise Block PLL LO 3.35 GHz, 2-2.4 GHz Input, 51 dB, 950-1350 MHz Output❓
👉Choose this LNB when you need a 2.0-2.4 GHz to 950-1350 MHz Low Noise Block Downconverter with 51 dB gain, noise figure ≤ 2.5 dB, image rejection ≥ 40 dB, and PLL LO stability of ± 1 ppm. Its built in Band Pass Filter, low-pass filtering, effective 25 dB ALC range, and compact protected case make it a practical solution for stable S-band to L-band RF downconversion.
Order on our website today – get your personal discount 🤝
Any questions – ask our manager: we always glad to find exact parameters according to your telecommunication needs📞
