13952

OMNI Antenna 1610-1630 MHz, 1.5 dB, LHCP Circular Polarization, 1×N-Type, 50 Ohm, Model RSWA-SL360

Short description

OMNI Antenna RSWA-SL360 is a 1610-1630 MHz LHCP circularly polarized omni antenna with 1.5 dB gain, 360° coverage, and N-Type 50 Ohm design for L-band Iridium monitoring tasks.

- +
  • Description
  • Downloads

Product Description

OMNI Antenna RSWA-SL360 is an L-band omnidirectional antenna and LHCP circularly polarized omni antenna for 1610-1630 MHz operation. It is an eight-element antenna array with a matching module, offering a 360° radiation pattern, compact dimensions, minimal visibility, and minimum windage.

This 1610-1630 MHz LHCP antenna is intended for monitoring L-band satellite terminals within the Iridium communication range. With 1.5 dB gain, N-Type 50 Ohm design, and 360° omnidirectional coverage, it supports L-band satellite signal monitoring, spectrum control, regulatory compliance monitoring, and RF monitoring and test systems. It is suitable for fixed and mobile deployment.

Parameter Value
Antenna type Eight-element antenna array with a matching module
Frequency range 1610-1630 MHz
Polarization LHCP
Connector N-Type
Nominal impedance 50 Ohm
Gain 1.5 dB typ
VSWR 1.5 typ (not less)
Horizontal Beamwidth 360°
Vertical Beamwidth 83°
Dimensions Ø135×225 mm
Weight 4.2 kg
Operating temperature -40 to +50
Storage temperature -60 to +80

Technical Specifications of OMNI Antenna 1610-1630 MHz

OMNI Antenna RSWA-SL360 is an L-band omnidirectional antenna designed for monitoring applications in the 1610-1630 MHz range. This LHCP omnidirectional antenna is an eight-element antenna array with a matching module and works as an LHCP circularly polarized omni antenna for L-band satellite terminal monitoring. As a 1610-1630 MHz L-band antenna, it is intended for operation within the Iridium communication frequency range.

This 1.5 dB L-band omni antenna provides 360° omnidirectional coverage with an 83° vertical beamwidth, making it suitable for monitoring platforms where no alignment is required. The antenna features 1.5 dB typ gain, VSWR ≤ 1.5 typ, 50 Ohm nominal impedance, and a 1×N-Type connector. Its compact dimensions, minimal visibility, and minimum windage support fixed and mobile deployment.

Key Features of OMNI Antenna 1.5 dB, LHCP Circular Polarization

360° omnidirectional coverage

  • Full 360° horizontal coverage
  • No directional aiming required
  • Suitable for continuous L-band monitoring

LHCP polarization

  • Left-hand circular polarization
  • Suitable for Iridium compatibility
  • Designed for satellite terminal monitoring tasks

Stable RF performance

  • 1610-1630 MHz frequency range
  • 1.5 dB typ gain
  • VSWR ≤ 1.5 typ
  • 1×N-Type, 50 Ohms

Practical deployment

  • No alignment required
  • Suitable for fixed and mobile deployment
  • Compact design with minimal visibility and minimum windage

Applications

Iridium terminal monitoring

  • Monitoring of ground-based Iridium terminals
  • Monitoring of Iridium terminals (Tx/Rx)
  • Suitable for L-band satellite terminal monitoring

L-band signal monitoring

  • Detection and analysis of L-band satellite signals
  • Suitable for RF monitoring systems
  • Can be used in RF test systems

Spectrum and compliance tasks

  • Spectrum control and regulatory compliance monitoring
  • Identification of unauthorized transmissions
  • Identification of interfering transmissions

Monitoring platforms

  • Suitable for mobile monitoring platforms
  • Suitable for fixed monitoring platforms

Compatibility of OMNI Antenna Model RSWA-SL360

Frequency compatibility

  • Designed for 1610-1630 MHz operation
  • Suitable for L-band satellite monitoring applications

RF interface compatibility

  • Equipped with 1×N-Type connector
  • Nominal impedance: 50 Ohms
  • Suitable for compatible RF monitoring and test equipment

Deployment compatibility

  • Suitable for fixed deployment
  • Suitable for mobile deployment
  • No alignment required during use

How It Works❓

An omnidirectional antenna receives L-band RF signals over a full 360° horizontal pattern, so no directional aiming is required. In this model, the eight-element antenna array with a matching module supports operation in the 1610-1630 MHz range with LHCP polarization, making it suitable for monitoring of Iridium terminals, as well as RF monitoring and test systems.

Why Choose the Model RSWA-SL360❓

👉Choose this antenna when you need full 360° omnidirectional coverage, LHCP polarization for Iridium monitoring, 1.5 dB typ gain, VSWR ≤ 1.5 typ, and a 1×N-Type 50 Ohm configuration for fixed or mobile monitoring platforms with no alignment required.

👉Order on our website today and get your personal discount.

If you have any questions, contact our manager — we are always ready to find the exact parameters for your telecommunication needs.📞

Taking into consideration that we (ROKS PrJSC) are developer and system integrator, also do not stop on our technical growth and improvement, know that the view of all our devices and equipment including their technical parameters may be different from pictures presented on website and parameters listed on each device webpage.

Note! All details the customer has to confirm in advance during ordering and before payment. Those parameters that were not specified and / or were not agreed while ordering will be implemented as basic at the discretion of the manufacturer. Each of our customers has a 1.5 year warranty and 7 year aftersales support for the whole range of our products.

 

Documentation