Product Description
Wi-Fi Router Diplexer 2.4-2.5 GHz & 5.15-5.95 GHz, 2-Band, N-Female 1+2 is a Wi-Fi router diplexer and RF diplexer for dual-band signal combining and splitting over a single coax cable. It uses COM-Low-High ports (common port + low band port + high band port) to multiplex/demultiplex the 2.4–2.5 GHz and 5.15–5.95 GHz ranges.
This 3-port Wi-Fi diplexer splitter/combiner features N-Female 1+2 (COM+2) connectors, insertion loss ≤1.0 dB, and port decoupling (isolation) ≥39.9 dB in 2.4–2.5 GHz and ≥31.0 dB in 5.15–5.95 GHz. VSWR is specified as 1.27 (2.4 port), 1.3 (5.8 port), and 1.3–1.33 (COM port). N-Female provides a secure threaded RF connection.
| Characteristic |
Value for 2.4-2.5 GHz band |
Value for 5.15-5.95 GHz band |
| Operating frequency range |
2.4…2.5 GHz |
5.15…5.95 GHz |
| Transmission coefficient (loss), max |
–1.0 dB |
–1.0 dB |
| Isolation, min |
–39.9 dB |
–31.0 dB |
| VSWR at “2.4 GHz” port, max |
1.27 |
– |
| VSWR at “5.8 GHz” port, max |
– |
1.3 |
| VSWR at “2.4 GHz + 5.8 GHz” port, max |
1.3 |
1.33 |
| Connector type |
N-type female |
N-type female |
Technical Specifications of Wi-Fi Router Diplexer (2.4-2.5 GHz & 5.15-5.95 GHz)
Low-band path (2.4-2.5 GHz)
- Insertion loss (max): ≤ 1.0 dB
- Isolation / decoupling (min): ≥ 39.9 dB
- VSWR (2.4 GHz port, max): 1.27
- VSWR (COM port, max): 1.3
High-band path (5.15-5.95 GHz)
- Insertion loss (max): ≤ 1.0 dB
- Isolation / decoupling (min): ≥ 31.0 dB
- VSWR (5.8 GHz port, max): 1.3
- VSWR (COM port, max): 1.33
Ports & connectors
- 3-port / 2-band diplexer, N-Female (COM + Low + High)
- COM: “2.4 GHz + 5.8 GHz”
- Low: “2.4 GHz”
- High: “5.8 GHz”
Internal filtering
- Low band: LPF
- High band: HPF
- Filters: LTCC technology
Key Features of Wi-Fi Router Diplexer, 2-Band, N-Female 1+2
- Wi-Fi diplexer / RF diplexer for dual-band signal combining and splitting
- Single coax cable solution: combine 2.4-2.5 GHz + 5.15-5.95 GHz onto one line, or split back to two ports
- Clean separation between low band and high band via COM-Low-High port structure
- Low passband loss: insertion loss (transfer) ≤1.0 dB (max)
- High decoupling (isolation) between bands: ≥39.9 dB (2.4-2.5 GHz) and ≥31.0 dB (5.15-5.95 GHz)
- Stable matching per specification: VSWR 1.27 / 1.3 / 1.3-1.33
- N-Female connectors for reliable RF connection (secure threaded N-type interface)
Applications
- Dual-band Wi-Fi router integration where 2.4 GHz and 5 GHz paths must be routed by frequency
- Access point (AP) antenna feed management using COM-Low-High ports
- Consolidate cabling in RF installations: one-cable connection between router and antenna system
- Rooftop / mast wireless cabling scenarios where using a single coax line simplifies installation (example stated)
Compatibility of Wi-Fi Router Diplexer 2.4-2.5 GHz & 5.15-5.95 GHz
- Compatible with dual-band Wi-Fi routers and access points operating in 2.4-2.5 GHz and 5.15-5.95 GHz
- Intended for systems using N-Female RF connections and band-specific ports (COM / 2.4 / 5.8)
How It Works ❓
This frequency-selective network performs multiplexing / demultiplexing of Wi-Fi bands:
- The common port (COM) carries both bands on one coax line.
- The low-band path routes only 2.4-2.5 GHz to the 2.4 port (LPF path).
- The high-band path routes only 5.15-5.95 GHz to the 5.8 port (HPF path).
This enables frequency-based combining/splitting without switching, using COM-Low-High ports.
Why Choose the Wi-Fi Router Diplexer 2.4-2.5 GHz & 5.15-5.95 GHz, 2-Band, N-Female 1+2❓
👉Choose this Wi-Fi router diplexer 2.4-2.5 GHz & 5.15–5.95 GHz, 2-band, N-Female 1+2 (COM+2) when you need a defined-spec solution: insertion loss ≤1.0 dB, decoupling (isolation) ≥39.9/≥31.0 dB, and VSWR 1.27/1.3/1.3–1.33, with a COM-Low-High port layout for single-cable routing.
🤝Add this dual band Wi-Fi diplexer N-Female to simplify your setup, reduce cabling, and implement clean band separation between the 2.4–2.5 GHz and 5.15–5.95 GHz paths.
